メインコンテンツにスキップ

ロジクール MX Master サイドフットの取り外し

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 2を翻訳中

手順2
Logitech MX Master Side Feet Removal, Separate the left foot adhesive: 手順 0、 3の画像 1 Logitech MX Master Side Feet Removal, Separate the left foot adhesive: 手順 0、 3の画像 2 Logitech MX Master Side Feet Removal, Separate the left foot adhesive: 手順 0、 3の画像 3
Separate the left foot adhesive
  • Insert an opening pick between the left foot and the lower case.

  • Go slowly, and make sure the pick slides underneath both the foot and its adhesive pad. These layers separate easily.

  • If you plan on reusing your mouse feet, be careful not to crease them or separate them from their adhesive pads.

  • Slide your pick under the foot to separate its adhesive until you can grab it with your fingers.

左足と下部ケースの間にオープニングピックを差し込みます。

ゆっくりと作業を行い、ピックがフットと接着パッドの両方の下を滑るようにする。これらのレイヤーは簡単に乖離します。

マウスフットを再利用する場合は、折り目をつけたり、接着パッドから剥がしたりしないように注意してください。

ピックを足の下に滑らせ、指でつかめるようになるまで接着剤を分離させます。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります