メインコンテンツにスキップ

Retrait patins latéraux souris MX Master Logitech

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての4個のガイドに反映されます。

英語
フランス語

手順 2を翻訳中

手順2
Logitech MX Master Side Feet Removal, Separate the left foot adhesive: 手順 0、 3の画像 1 Logitech MX Master Side Feet Removal, Separate the left foot adhesive: 手順 0、 3の画像 2 Logitech MX Master Side Feet Removal, Separate the left foot adhesive: 手順 0、 3の画像 3
Separate the left foot adhesive
  • Insert an opening pick between the left foot and the lower case.

  • Go slowly, and make sure the pick slides underneath both the foot and its adhesive pad. These layers separate easily.

  • If you plan on reusing your mouse feet, be careful not to crease them or separate them from their adhesive pads.

  • Slide your pick under the foot to separate its adhesive until you can grab it with your fingers.

Insérez un médiator entre le patin gauche et le boîtier inférieur.

Allez-y doucement, et assurez-vous que le médiator glisse sous le patin et son adhésif. Ces couches se séparent facilement.

Si vous prévoyez de réutiliser les patins de votre souris, attention de ne pas les plisser ou les séparer de leur adhésif.

Faites glisser votre médiator sous le patin, pour séparer son adhésif jusqu'à pouvoir l'attraper avec vos doigts.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります