メインコンテンツにスキップ

Logitech MX Master 2S Mouse Feet Replacement

英語
中国語

手順 1を翻訳中

手順1
Logitech MX Master 2S Mouse Feet Replacement, Soften the mouse feet adhesive: 手順 0、 1の画像 1
Soften the mouse feet adhesive
  • Flip the mouse's power switch into the OFF position, unplug any cables, and flip it over so the feet are facing up.

  • The unique shape of some mice can prevent them from laying flat. If you need to, lay your mouse on a soft towel to prevent wobble.

  • If you're planning to reuse your existing mouse feet, note that the adhesive needs to be thoroughly heated for them to be cleanly removed.

  • Heat an iOpener and apply it to the mouse feet for about two minutes.

  • Alternatively, you can use a hair dryer to soften the mouse feet adhesive.

  • When using a hair dryer, don't heat the feet for more than a couple seconds at a time—anything hotter than just warm to the touch risks melting or warping the plastic lower case.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります