メインコンテンツにスキップ

iPhone 14 Plus Frontkamera-Einheit tauschen

英語
ドイツ語

ガイドの前提条件

この翻訳が完了したとみなされる前に、全ての必須条件ガイドを翻訳する必要があります。

iPhone 14 Plus Pentalobe-Schrauben tauschen

Plektrum mit einer 3 mm-Tiefenmarkierung versehen

iPhone 14 Plus Glasrückseite tauschen

ガイド情報

= 完了 = 不完全
    Use this guide to remove or replace the front-facing camera assembly in an iPhone 14 Plus.
    This guide was created using the ***A2886*** (international) model. If you're fixing a different iPhone 14 Plus model, there may be some visual discrepancies, but the procedure should be the same.
    You’ll need replacement adhesive to reattach the screen when reassembling the device. Your device will function normally, but will most likely lose its IP (Ingress Protection) rating.

    This assembly includes the front-facing camera and Face ID hardware. These parts come as one unit, and the sensors are [link|https://www.ifixit.com/News/66879/iphone-14-parts-pairing-results-apple-is-still-trying-to-monopolise-repair|uniquely paired to your logic board|new_window=true]. ***Note:*** If you replace this part, ***Face ID will no longer work***. This repair will restore a broken selfie cam to working order, but on iOS 17.6 and earlier, only Apple or an Apple “authorized” technician can restore Face ID. On iOS 18 and newer, you can recalibrate new, genuine front-facing cameras using Apple's [link|https://support.apple.com/en-us/120579|Repair Assistant|new_window=true].
      If possible, turn on your device and test your repair before installing new adhesive and resealing.
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      ***To reassemble your device, follow these instructions in reverse order.***
      After your repair, depending on the replacement part, you may be able to [link|https://support.apple.com/en-us/120579|calibrate it using Apple's Repair Assistant|new_window=true], available as of iOS 18. Update your device, navigate to Settings ***→*** General ***→***About ***→*** Parts & Service History, tap Restart & Finish Repair, and follow the onscreen prompts.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Ask/iPhone+14+Plus|Answers community] for help.

      ガイドの手順

      手順1 — Halterung der Frontkamera-Einheit losschrauben

      Entferne die beiden 1,2 mm langen Y000 Schrauben, mit denen die Kabelhalterung der Frontkamera-Einheit befestigt ist.

      手順2 — Kabelhalterung der Frontkamera-Einheit entfernen

      Entferne die Kabelhalterung der Frontkamera-Einheit mit einer Pinzette oder deinen Fingern.

      手順3 — Kamera- und Sensorkabel abtrennen

      Heble die Stecker der Kamera- und Sensorkabel mit einem Spudger gerade aus ihren Anschlüssen hoch und trenne sie ab.

      手順4 — Frontkamera-Einheit entfernen

      Entferne die Frontkamera-Einheit mit einer Pinzette oder deinen Fingern.

      クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります