メインコンテンツにスキップ

Sostituzione vetro posteriore iPhone 14 Plus

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての6個のガイドに反映されます。

英語
イタリア語

手順 14を翻訳中

手順14
iPhone 14 Plus Rear Glass Replacement: 手順 0、 3の画像 1 iPhone 14 Plus Rear Glass Replacement: 手順 0、 3の画像 2 iPhone 14 Plus Rear Glass Replacement: 手順 0、 3の画像 3
  • Insert your pick underneath the top-left edge of the phone. Slide it around the top-left corner and halfway across the top edge.

  • Don't insert the pick more than 3 mm, as you may damage or smear the camera array.

  • Don't try to fully separate the rear glass yet, as there's a fragile ribbon cable connecting it to the iPhone's logic board.

Inserisci il plettro sotto l'angolo in alto a sinistra del telefono. Fallo scorrere intorno all'angolo e fino a metà del bordo superiore.

Non inserire il plettro per più di 3 mm, poiché potresti danneggiare o sporcare le fotocamere.

Non cercare ancora di separare completamente il vetro posteriore, poiché è ancora connesso alla scheda logica dell'iPhone tramite un fragile cavo a nastro.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります