メインコンテンツにスキップ

Logitech MX Keys 分解ガイド

英語
日本語

手順 2を翻訳中

手順2
Logitech MX Keys disassembly guide: 手順 0、 3の画像 1 Logitech MX Keys disassembly guide: 手順 0、 3の画像 2 Logitech MX Keys disassembly guide: 手順 0、 3の画像 3
  • Remove the battery. Note it's lightly glued on the underside.

  • Unscrew two (slightly larger, silver) phillips screws that secure the PCB

  • Unscrew the last small black PCB screw on the top right corner

  • Remove the orange tape securing the serial cable (put it to one side, you'll need to put it back if reassembling)

  • Remove the small jumper with twisted red/black wires coming from it

  • Carefully lift the serial connector (it's hinged) and lift the data cable up and away

  • Remove PCB

バッテリーを取り外します。下側に軽く接着されていることに注意してください。

PCBを固定している2本の(少し大きめの銀色の)プラスネジを緩めます。

右上隅にある最後の小さな黒いPCBネジを外します

シリアルケーブルを固定しているオレンジ色のテープを取り外します(片側に置いておき、再組み立てするときに元に戻す必要があります)。

ねじれた赤/黒のワイヤーが出ている小さなジャンパーを取り外します

シリアルコネクタ(ヒンジ付き)を慎重に持ち上げ、データケーブルを持ち上げて取り外します。

PCBを取り外す

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります