手順 2を翻訳中
手順2
Use a Cold Chisel
-
With the device on a firm surface, place the tip of the cold chisel across the middle of the memory chip and strike the cold chisel firmly with the hammer.
-
The chip should split neatly in two. Half of it is likely to take flight - make sure there are no children around with their eyes at a similar level to the chip.
-
Repeat for all other memory chips on both sides of the board.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。