メインコンテンツにスキップ

Remplacement de la coque arrière du Samsung Galaxy Note20 Ultra

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての17個のガイドに反映されます。

英語
フランス語

手順 4を翻訳中

手順4
Samsung Galaxy Note20 Ultra Rear Cover Replacement, Cut along the perimeter of the rear cover: 手順 0、 3の画像 1 Samsung Galaxy Note20 Ultra Rear Cover Replacement, Cut along the perimeter of the rear cover: 手順 0、 3の画像 2 Samsung Galaxy Note20 Ultra Rear Cover Replacement, Cut along the perimeter of the rear cover: 手順 0、 3の画像 3
Cut along the perimeter of the rear cover
  • While cutting through the adhesive, don't insert the opening pick more than 5 mm into the phone or you risk damaging the internal components.

  • Repeat the process of heating and cutting the adhesive along the three remaining sides of the rear cover.

  • You can insert each new opening pick in the gaps created by the opening picks left in each corner.

  • As you proceed, leave an opening pick in each corner to prevent the adhesive from re-sealing.

  • Slide an opening pick back and forth around the entire perimeter of the phone to release any missed adhesive. Reheat any stubborn adhesive.

Lors de la découpe de l'adhésif, n'insérez pas le médiator de plus de 5 mm dans le téléphone, vous risqueriez d'endommager les composants internes.

Répétez le processus de chauffage et de découpe de l'adhésif le long des 3 côtés restants de la coque arrière.

Vous pouvez insérer chaque nouveau médiator dans les espaces créés par les médiators laissés dans chaque coin.

Au fur et à mesure que vous avancez, laissez un médiator dans chaque coin pour empêcher l'adhésif de recoller.

Faites ensuite glisser un médiator d'avant en arrière sur tout le périmètre du téléphone, pour décoller tout adhésif oublié. Refaites chauffer tout adhésif récalcitrant.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります