手順 5を翻訳中
手順5
Handle Reassembly
-
Fit the right handle back onto the white central post. Wipe away excess grease.
-
Tuck wires into the handle between screw bosses as shown. Ensure the three wires to the sensor are looped so that rotation of the handle does not tug on the wires.
-
Position in place the center cover, using masking tape to hold in place, if needed.
-
Slide the left handle in evenly from from the left until base mates up tight around the white center post and the top gives an audible click as it snaps into place.
-
Reinstall the screws in reverse order.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。