メインコンテンツにスキップ

Reemplazo de SSD de Xbox Series X

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

英語
スペイン語

手順 1を翻訳中

手順1
Xbox Series X SSD Replacement, Pry off the SSD shield: 手順 0、 3の画像 1 Xbox Series X SSD Replacement, Pry off the SSD shield: 手順 0、 3の画像 2 Xbox Series X SSD Replacement, Pry off the SSD shield: 手順 0、 3の画像 3
Pry off the SSD shield
  • The SSD shield has thermal pads on either side, so ensure these are kept as intact as possible during this procedure.

  • Use the flat end of a spudger to pry up the edges of the metal SSD shield.

  • Remove the SSD shield.

El chasis del SSD tiene almohadillas térmicas en cada lado, asegúrese que estas queden lo más intactas posible durante este procedimiento.

Usa la punta delgada de una espátula para despegar las esquinas de metal del chasis del SSD.

Remueve el chasis del SSD.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります