/
私のワークベンチ

お持ちのデバイス用の修理ガイドとパーツ一覧とアンサーフォーラムにアクセスする。

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
参加する
ログイン

Sostituzione gruppo struttura centrale Xbox Series X

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての17個のガイドに反映されます。

ガイドに戻る
英語
イタリア語
前の手順

手順 6を翻訳中

手順6
Xbox Series X Center Chassis Assembly Replacement, Remove the center chassis assembly: 手順 0、 3の画像 1 Xbox Series X Center Chassis Assembly Replacement, Remove the center chassis assembly: 手順 0、 3の画像 2 Xbox Series X Center Chassis Assembly Replacement, Remove the center chassis assembly: 手順 0、 3の画像 3
Remove the center chassis assembly

  • The center chassis is aligned to the shell with guide pegs. These pegs will need to slide out of their slots to allow the chassis to be lifted out.

  • Grip the center chassis and pull it towards the green fan grille at the top of the shell, uncoupling the guide pegs from the shell.

  • Lift out the center chassis assembly to remove it from the shell.

  • During reassembly, make sure neither of the ribbon cables get pinched as you lower the center chassis into the shell.

Rimuovi il gruppo della struttura centrale

La struttura centrale è allineata al guscio con dei perni guida. Questi perni dovranno sfilarsi dai loro alloggi per permettere alla struttura di venire sollevata.

Prendi la struttura centrale e tirala verso la parte superiore del guscio, separando i perni guida dal guscio.

Solleva l'insieme del telaio centrale per rimuoverlo dal guscio.

Durante il rimontaggio, assicurati che nessuno dei cavi a nastro si schiacci mentre abbassi la struttura centrale nel guscio.

[title] Remove the center chassis assembly
[* icon_note] The center chassis is aligned to the shell with guide pegs. These pegs will need to slide out of their slots to allow the chassis to be lifted out.
[* black] Grip the center chassis and pull it towards the green fan grille at the top of the shell, uncoupling the guide pegs from the shell.
[* black] Lift out the center chassis assembly to remove it from the shell.
- [* icon_reminder] During reassembly, make sure neither of the ribbon cables get pinched as you lower the center chassis into the shell.
+[* icon_reminder] During reassembly, make sure neither of the ribbon cables get pinched as you lower the center chassis into the shell.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。