メインコンテンツにスキップ

Changement carte mère iMac Intel 21,5" écran Retina 4K (2019)

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

英語
フランス語

手順 7を翻訳中

手順7
iMac Intel 21.5" Retina 4K Display 2019 Logic Board Assembly Replacement: 手順 0、 3の画像 1 iMac Intel 21.5" Retina 4K Display 2019 Logic Board Assembly Replacement: 手順 0、 3の画像 2 iMac Intel 21.5" Retina 4K Display 2019 Logic Board Assembly Replacement: 手順 0、 3の画像 3
  • Rotate the top of the AirPort/Bluetooth connector bracket away from the logic board, then lift the bracket straight up and remove it.

  • During reinstallation, make sure to line up the tabs on the bottom of the bracket with the holes in the EMI shield. These tabs should seat fully inside the holes before the bracket is installed.

Faites pivoter la partie supérieure du support du connecteur AirPort/Bluetooth pour l'éloigner de la carte mère, puis soulevez le support et retirez-le.

Lors de la réinstallation, veillez à aligner les languettes situées sous le support avec les trous du blindage électromagnétique (EMI). Ces languettes doivent s'insérer complètement dans les trous avant que le support ne soit installé.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります