メインコンテンツにスキップ

MacBook Pro 13" Two Thunderbolt Ports 2019 배터리 교체

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
韓国語

手順 9を翻訳中

手順9
MacBook Pro 13" Two Thunderbolt Ports 2019 Battery Replacement: 手順 0、 2の画像 1 MacBook Pro 13" Two Thunderbolt Ports 2019 Battery Replacement: 手順 0、 2の画像 2
  • Gently work the card deeper under the battery cell to break up the adhesive securing it in place.

  • This should not require much force—the adhesive remover does most of the work. If you aren't able to get your card under the battery cell, apply a bit more adhesive remover as instructed above and wait 2-3 minutes before trying again.

카드를 배터리 셀 아래에 더 깊게 밀어서 제자리에 고정하는 접착제를 떼세요.

이는 많은 힘이 필요하지 않으며—접착제 제거제가 대부분의 일을 합니다. 배터리 셀 아래에 카드를 넣을 수 없는 경우, 위의 지침대로 접착제 제거제를 조금 더 바르고 2-3분 후에 다시 시도하세요.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります