メインコンテンツにスキップ

Nintendo DS マザーボードの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 3を翻訳中

手順3
Nintendo DS Main Circuit Board Replacement: 手順 0、 2の画像 1 Nintendo DS Main Circuit Board Replacement: 手順 0、 2の画像 2
  • Locate the two small ribbon cables, beneath the rightmost large ribbon cable.

  • Slide the locks for the small ribbon cables down to the side, and remove the cables.

  • It may be useful to use tweezers to remove the small ribbon cables.

  • Be careful not to damage the delicate ribbon cables.

一番右の大型リボンケーブルの下に搭載された、小型のリボンケーブル2本を確認します。

小型のリボンケーブル用のロックを横にスライドして、ケーブルを取り出します。

ピンセットを使ってこのリボンケーブルを取り出すこともできます。

デリケートなリボンケーブルにダメージを与えないよう、ご注意ください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります