メインコンテンツにスキップ

Smontaggio Apple Watch Series 5

英語
イタリア語

手順 8を翻訳中

手順8
Apple Watch Series 5 Teardown: 手順 0、 3の画像 1 Apple Watch Series 5 Teardown: 手順 0、 3の画像 2 Apple Watch Series 5 Teardown: 手順 0、 3の画像 3
  • Out comes this ticker’s brain, the all-new—or maybe not?—S5 system-in-package.

  • Although it benefits from a new compass and double the onboard storage—32 GB, up from 16—most of the integrated circuits remain entombed under a solid layer of resin, out of our reach. Of the few chips above the surface, here's what we can make out:

  • Skyworks 229-15 465371 1918 MX, most likely front-end module

  • 16 CJ

  • YY NCJ 7NE (likely the acceleration + gyro sensor)

  • API 924 920

  • Looking at the attached display flex cables and laying them over those of the Series 4 for comparison, we can see that the plug in the middle gained 4 pins and the one on the bottom gained 2. Without knowing their function, this closes the door on interchangeability.

Viene fuori il cervello di questa macchina da tic tac, il nuovissimo—o forse no?—system-in-package S5.

Benché goda di una nuova bussola e raddoppi la memoria integrata, 32 GB rispetto ai 16 precedenti, la maggior parte dei circuiti integrati rimane sepolta sotto un solido strato di resina che ci blocca l'accesso. Dei pochichips al di sopra della superficie, ecco che cosa possiamo dire:

Skyworks 229-15 465371 1918 MX, molto probabilmente un modulo front end

YY NCJ 7NE (dovrebbe trattarsi del sensore di accelerazione + giroscopio)

Disponendo i cavi flex attaccati al display sopra a quelli del Series 4 per confrontarli, possiamo notare che la spina centrale ha 4 pin in più e quella in basso ne ha due. Senza nemmeno sapere che cosa cambia in termini di funzionalità, possiamo dire che questo chiude la porta a qualsiasi intercambiabilità.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります