メインコンテンツにスキップ

MacBook Pro 15" Touch Bar Late 2016 배터리 연결 해제

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての8個のガイドに反映されます。

英語
韓国語

手順 1を翻訳中

手順1
MacBook Pro 15" Touch Bar Late 2016 Battery Disconnection: 手順 0、 2の画像 1 MacBook Pro 15" Touch Bar Late 2016 Battery Disconnection: 手順 0、 2の画像 2
  • Peel up and remove the large rectangular battery board cover, on the edge of the logic board nearest the battery.

  • If the cover doesn't peel up easily, apply mild heat with an iOpener, hair dryer, or heat gun to soften the adhesive underneath, and try again.

  • If the cover doesn't seat securely during reassembly, try rotating it 180 degrees. It must be oriented correctly in order for the adhesive pads underneath to contact the board screws.

배터리와 가장 가까운 로직 보드 가장자리에 있는 커다란 직사각형 배터리 보드 커버를 벗겨서 분리하세요.

커버가 쉽게 벗겨지지 않으면 iOpener, 헤어 드라이어 또는 히트 건으로 약한 열을 가하여 아래의 접착제를 부드럽게 한 다음 다시 시도하세요.

조립할 때 커버가 제대로 장착되지 않으면 180도 돌려서 시도해 보세요. 아래에 있는 접착 패드가 보드 나사에 닿을 수 있도록 방향을 올바르게 맞춰야 합니다.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります