メインコンテンツにスキップ

第 4 代 iPod Nano 玻璃面板更换

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての6個のガイドに反映されます。

英語
中国語

手順 5を翻訳中

手順5
iPod Nano 4th Generation Glass Panel Replacement: 手順 0、 1の画像 1
  • Slide the display out of the Nano. It will move about .5" until the display data cable limits its travel.

  • Do not put unnecessary tension on the very thin display data cable.

将显示屏从Nano中滑出。 它将移动约0.5英寸直到显示数据电缆限制其滑动为止。

不要强行滑动使得显示排线收到不必要的拉力。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります