メインコンテンツにスキップ

iPhone XS Max 耳机扬声器和前传感器组件更换

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
中国語

手順 2を翻訳中

手順2
iPhone XS Max Earpiece Speaker and Front Sensor Assembly Replacement: 手順 0、 2の画像 1 iPhone XS Max Earpiece Speaker and Front Sensor Assembly Replacement: 手順 0、 2の画像 2
  • The earpiece speaker is lightly adhered in place.

  • Using a spudger, gently pry under the top edge of the speaker assembly, and flip it over—down and away from the top edge of the display.

  • The speaker remains attached via a very thin ribbon cable. Be careful not to strain or damage the cable.

耳机扬声器轻轻地粘附在适当位置。

使用撬棒,轻轻撬动扬声器组件的顶部边缘,然后将其翻转并远离显示器的顶部边缘。

扬声器通过非常薄的柔性电缆保持连接。小心不要拉紧或损坏电缆。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります