メインコンテンツにスキップ

Apple Watch Series 2ディスプレイの開口部

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 7を翻訳中

手順7
Apple Watch Series 2 Display Opening: 手順 0、 3の画像 1 Apple Watch Series 2 Display Opening: 手順 0、 3の画像 2 Apple Watch Series 2 Display Opening: 手順 0、 3の画像 3
  • To avoid straining the display cables, don't open the display all the way yet.

  • Open the display to about a 45° angle, and use tweezers to peel off the adhesive between the display and the Force Touch gasket.

  • Thread the adhesive around and behind the display cables to get it off completely.

ディスプレイケーブルを引っ張らないようにするには、ディスプレイを完全に開かないことです。

ディスプレイを約45度の角度で開き、ピンセットを使ってディスプレイとForce Touchガスケットの間の接着剤を慎重に剥がします。

ディスプレイケーブル周辺と裏に貼られた接着剤を綺麗に剥がします。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります