メインコンテンツにスキップ

iFixit uses cookies to enhance site functionality, analyze traffic, and personalize ads. By using our site, you agree to our cookie use and Privacy Policy.

iMac Intel 21.5インチ Retina 4K Display (2017) 電源ユニットの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 9を翻訳中

手順9
iMac Intel 21.5" Retina 4K Display (2017) Power Supply Replacement: 手順 0、 3の画像 1 iMac Intel 21.5" Retina 4K Display (2017) Power Supply Replacement: 手順 0、 3の画像 2 iMac Intel 21.5" Retina 4K Display (2017) Power Supply Replacement: 手順 0、 3の画像 3
  • You may find it helpful to set the iMac down on its back for the next couple of steps.

  • Use the flat end of a spudger to press the release clip on the side of the AC inlet cable connector inward.

  • While pressing on the release clip with the spudger, grasp the AC inlet cable, and pull the connector straight out of its socket.

次の2つの修理ガイドの作業をする際は、iMacの背面を下に置くと便利です。

スパッジャーの平らな端を使用して、ACインレットケーブルコネクタの内側に付けられたリリースクリップを内側に押します。

スパッジャーでリリースクリップを押しながら、ACインレットケーブルをつかみ、コネクタをソケットからまっすぐ引き出します。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります