メインコンテンツにスキップ

Canon PowerShot A1000 IS Case Disassembly

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

手順 8を翻訳中

英語
日本語
手順8
Canon PowerShot A1000 IS Case Disassembly: 手順 0、 2の画像 1 Canon PowerShot A1000 IS Case Disassembly: 手順 0、 2の画像 2
  • When replacing the cover, remove the AV/USB rubber cover for easier reconstruction.

  • Replace the front cover first leaving a small gap on the left hand side of the device for easy reattachment of the back cover.

  • Reattach the back cover by aligning it with the front cover and snapping the latches into place. Secure with screws in any order.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります