手順 10を翻訳中
手順10
-
Insert the end of the brake cable with a "nub" into the slot on the rear left brake.
-
Slide the cable onto the slot on the connector.
-
Slide the other end of the cable into the holder on the right rear brake.
-
Pull the cable to clamp down the brakes so they almost touch the rim of the wheel.
-
Tighten the screw so the cable does not come loose.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。