手順 2を翻訳中
手順2
-
This is the short coolant hose to be replaced. You can see it leaking in this picture. This is a typical failure.
-
During the thermostat housing removal process you'll have already loosened the upper hose clamp on the short hose. Now loosen the lower clamp.
-
With the lower clamp removed you'll be able to pull the short hose off the water pump inlet.
-
Use a pair of pliers for grip if you need to, but it should pull off by hand.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。