手順 4を翻訳中
手順4
-
Here is the keyboard ribbon cable seated in the zero insertion force (Zif) connector.
-
Release the ZIF connector to which the keyboard cable is attached, by lifting the clasp in an upward direction. Disconnect the keyboard cable from the system board.
-
Release the Zif connector to which the power button board cable is connected, by lifting the clasp of the Zif connector in an upward direction.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。