手順 6を翻訳中
手順6
Remove the LED emitter screw
-
The LED assembly is held in with two screws that are very hard to access. The short side of an L-handle hex key will work. Slowly, 60 degrees at a time.
-
These screws should have lock washers under them.
-
The emitter has a thermal transfer material under it that will hold it in place. Break this bond by prying gently.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。