注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。
手順 1を翻訳中
手順1
Disconnect the antenna cable
-
Insert one arm of a pair of angled tweezers under the metal neck of the black antenna cable coaxial connector, located on the top left corner of the logic board.
-
Gently lift straight up to disconnect the cable.
| [title] Disconnect the antenna cable | |
| - | [* black] Insert one arm of a pair of angled tweezers under the metal neck of the black antenna cable [guide|25629|coaxial connector|stepid=64972|new_window=true], located on the top left corner of the logic board. |
| + | [* black] Insert one arm of a pair of [product|IF145-020-5|angled tweezers] under the metal neck of the black antenna cable [guide|25629|coaxial connector|stepid=64972|new_window=true], located on the top left corner of the logic board. |
| [* black] Gently lift straight up to disconnect the cable. | |
| - | [* icon_reminder] To reconnect the cable, hold |
| + | [* icon_reminder] To reconnect the cable, hold the connector in place over its socket and press down with the flat end of a spudger—the connector should snap into place. If you're having trouble, don't try to force the connector over the socket. Reposition it and try again. |
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。