メインコンテンツにスキップ

Google Pixel 7a リアカバーの交換

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての14個のガイドに反映されます。

手順 16を翻訳中

英語
日本語
手順16
Google Pixel 7a Rear Cover Replacement, Rotate your top edge opening picks: 手順 0、 3の画像 1 Google Pixel 7a Rear Cover Replacement, Rotate your top edge opening picks: 手順 0、 3の画像 2 Google Pixel 7a Rear Cover Replacement, Rotate your top edge opening picks: 手順 0、 3の画像 3
Rotate your top edge opening picks
  • Remember to angle your picks upward and away from the frame during this step.

  • Roll the top edge pick so its flat edge is under the rear cover.

  • Roll the picks on each side of the camera bar so their flat edges are under the camera bar.

この手順では、ピックの挿入角度を上向きにし、フレームから離すことを忘れないでください。

上端のピックを下側に滑り込ませ、ピックの長辺側がリアカバーの下にくるように配置します。

カメラバーの両側にあるピックを下に滑り込ませて、同じく長辺端がカメラバーの下に来るように配置します。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります