手順 5を翻訳中
手順5
-
With the wheel pulled back, tighten the two axle nuts using the 15 mm socket wrench.
-
Tighten the non-drive side (side without the chain) first.
-
The wheel will angle as you tighten. Keep it centered with your hand as you finish tightening both axle nuts.
-
Use a tire pump to make sure the tire is full of air and ready to ride.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。