手順 6を翻訳中
手順6
Add markings on your hub for the kick lock
-
The way the kick lock works is just by pushing a metal pin into a metal plate that has valleys and ridges. That metal plate is screwed into the same spot as the disc brake
-
The original hub has markings on the top of the hub that indicate where a valley in that plate is. You can add these markings in with a white paint pen.
-
Lightly screw in the metal plate into the new hub for reference
-
Try to replicate the lines on the original hub by placing the lines on the new hub lined up with the center of each valley in the plate.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。