メインコンテンツにスキップ

Samsung Galaxy Note20 Rear Cover Replacement

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての12個のガイドに反映されます。

英語
日本語

手順 4を翻訳中

手順4
Samsung Galaxy Note20 Rear Cover Replacement, Cut along the perimeter of the rear cover: 手順 0、 3の画像 1 Samsung Galaxy Note20 Rear Cover Replacement, Cut along the perimeter of the rear cover: 手順 0、 3の画像 2 Samsung Galaxy Note20 Rear Cover Replacement, Cut along the perimeter of the rear cover: 手順 0、 3の画像 3
Cut along the perimeter of the rear cover
  • Repeat the process of heating and cutting the adhesive along the three remaining sides of the rear cover.

  • You can insert each new opening pick in the gaps created by the opening picks left in each corner.

  • As you proceed, leave an opening pick in each corner to prevent the adhesive from re-sealing.

  • If the rear cover is still attached to the frame after cutting through all four sides, try slicing through the adhesive again with an opening pick.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります