手順3に変更
- Brett Harttによって編集
承認済みの編集 : Brett Hartt
- 前
- 後
- 変更なし
手順ライン
| + | [* black] Loosen the spoke nipples that attach to the same side of the wheel that the caliper is touching. At the same time, tighten the spokes that attach to the opposite side of the hub. |
|---|---|
| + | [* black] As a starting point, turn all the spokes half of a turn for each of the spokes near the caliper contact point. |
| + | [* icon_note] In the photo, the red marked spokes are being tightened, and the blue marked spokes are being loosened. This will shift the rim closer to the viewer. |
| + | [* black] Spin the wheel. Tighten the calipers again until they touch the rim on only one side at a time at certain point. Repeat steps 2-3 until the caiplers touch both sides of the rim evenly at every point on the rim. |
画像1
以前の画像はありません
追加
画像2
以前の画像はありません
追加