手順10に変更
- josephsmillsによって編集
承認済みの編集 : Jeff Suovanen
- 前
- 後
- 変更なし
手順ライン
| [* black] Take a thin prying tool and slide it between the glass and the plastic housing of the phone. | |
| - | [* black] I found it rather easy to remove this screen (versus say, a Galaxy S4) so it shouldn't take too much pressure to get the screen up. |
| - | [* black] Go around the perimeter of the phone and lift the glass free. |
| + | [* black] I found it rather easy to remove this screen (versus, say, a Galaxy S4) so it shouldn't take too much pressure to get the screen up. |
| + | [* black] Go around the perimeter of the phone and lift the glass free. Do not slide your opening tool in too deep while doing this. There is a cable in the upper-right corner and a wider, flat cable with two connectors in the bottom towards the left - middle of the screen. |
| [* black] Be sure when replacing the screen to use a good bit of double sided tape. I had problems with the bottom right corner coming up and had to disassemble and reapply tape. |