Senior technical writer, photographer, and tinkerer at iFixit HQ in San Luis Obispo, California.
Like many folks here, I’ve been fixing things most of my life—cars, computers, time machines. (Wait, sorry—that last thing happens later.)
I joined iFixit in 2013 as a technical writer, working mainly on repair guides and teardowns. I later co-wrote a lot of the instructions for iFixit’s university technical writing project, and helped coach a few thousand engineering students from over 50 universities through their technical writing coursework. I’ve enjoyed being a guest lecturer and attending academic conferences on technical writing, and helped teach a few of iFixit’s in-house workshops for technical writing instructors.
If working at iFixit sounds awesome, that’s because frequently, it is—I’m grateful to have been at the right place and time to collaborate on some world-class projects with this team. Because of iFixit, I’ve helped Greenpeace create its guide to greener electronics, consulted on repairability for some of the world’s top hardware engineers, and written repair guides for Patagonia.
My wife Zan, seen here in a rare photograph that I’m allowed to share with the internet.
I’m naturally an introvert and prefer to stay behind the camera rather than in front of it, but sometimes accidents happen. My talking head has appeared on a few broadcast programs and podcasts, like that time we tore down a Magic Leap One. I’ve also appeared briefly in at least one VICE documentary, wherein I badly needed a haircut and hadn’t slept since two dinners ago.
I do enjoy anonymously sharing my photos though, and they frequently pop up in the tech press. That’s one of the really fun aspects of this job—you never know when your work might help a technology journalist explain a battery problem, solve a waterproofing mystery, or break down a new laptop design.
In my free time I enjoy scuba diving and reading (and sometimes writing) a lot of science fiction nonsense.
"Boot loop and error ppt006 - Help!"に関する回答PPT006 is a battery fault. Did you try plugging in the old battery to see if that clears it up? If so, the new battery may be defective.
"Do replacement batteries work with battery health feature now?"に関する回答You’re right, the feedback is mixed, and it’s because iFixit batteries are not 100% reliable on this yet—whether or not the battery health feature will work depends on your exact model iPhone, which iOS version you have installed, and the battery’s internal firmware version. We’ve developed a long-term solution that should work for all batteries on all past (and future) versions of iOS, and it’s making its way out over the next month or two. So if you want the battery health feature and you have the luxury of waiting a bit, you may want to check back in February or March. To your second question: the phone is only throttled if the battery is unable to supply the needed voltage. So yeah, running benchmarking software like Geekbench is a great way to verify that everything is ship shape. Hope this helps!
"Samsung Essentials All In One Teardown"に関する回答Have you seen this video? Looks like a similar model (but maybe not identical, so be extra careful). The RAM and hard drive both look pretty accessible once you have it open. Hope this helps!
"Can I repair my home button with a kit?"に関する回答Hey Lee, Unfortunately the answer is no, there’s no kit that will restore Touch ID functionality once the home button or its cable get damaged. Your options are: (1) Replace the button yourself—it’s a fairly easy job, but Touch ID will be permanently disabled. It will work only as a home button. (2) Pay Apple for a screen replacement—more expensive, but they’ll include a new button and they can restore Touch ID. (3) Find a repair shop with a professional microsoldering rig and the skills to patch your home button cable back together. Hope this helps!
"iOS 12 Fixed Auto Brightness?"に関する回答I’m seeing numerous reports that iOS 12 beta 2 restores auto brightness function for affected phones, with True Tone still being disabled. One or two further reports state that a DFU restore to iOS 11.4 enables True Tone. I haven’t had a chance to test any of this yet. It does seem like Apple is working on the problem, although it remains to be seen whether any potential fix makes it into the final release. Stay tuned!
"Why doesn't keyboard and trackpad work after battery replacement?"に関する回答It sounds to me like something just isn't connected properly. IIRC there's a temp sensor integrated into the touchpad, and if it's disconnected the fans will run full blast. I'd probably just re-do the repair and reseat each connector really carefully, making sure the ribbons are straight and fully inserted, and that they aren't connected upside-down or damaged in any way. Let us know what you find. Good luck!
"iFixit Tri-Point Y000 driver bit for iPhone 7 / 7 Plus"に関する回答I've used the Y000 bit pretty extensively on the 7 Plus, and it's the same bit that we used for all our guides and teardowns for both phones. It also works for the Watch, which has much smaller screws. I'm afraid we don't make anything smaller! I will say that the tri-point screws sometimes require more pressure than I'm accustomed to, in order for the driver to bite. I think it's because the heads are so shallow; the driver needs to be really snug and absolutely on-axis in order to get any traction on the screw head. I'd suggest giving it another whirl! On the off-chance you got some kind of defective bit (it's very rare, but it happens), reach out to our customer service team for a replacement. Good luck!
"Screen connectors don't fit"に関する回答First, you should probably verify the model of your phone and make sure you've got the right part. I'm pretty sure a fully assembled iPhone 6s display should have three connectors, not four. Next, compare the new display with the old display. Are they identical? Are the connectors physically different? Sometimes the display ribbon cables get folded in the wrong order so they won't line up properly, and in that case it's a simple matter of carefully reorganizing the cables so they line up with their sockets. Let us know what you find and maybe we can help further. Good luck!
"Nothing to connect home button to on replacement screen"に関する回答Hi David, The home button plugs into the home button link cable, which is a flat ribbon cable sandwiched between the back of the display and the shield plate. If the part you purchased does not include a new home button link cable, you can use this guide to transplant the cable from your old screen to your new one (assuming it is in good condition). If you prefer, we also offer replacement screens with the home button link cable preinstalled to make your repair easier (they do cost a little more). If you bought your screen from iFixit and would like to return it and purchase the "full assembly" version, just call or email us here. Hope this helps!
"Need help with these Connector latches"に関する回答You had it right the first time: those are ZIF connectors. The white part that fell out is the latch you're meant to flip up in order to release the cable. Here's a video of a tech working on a Spectre XT. At around 2:18 you can see the ribbon cables getting correctly detached. At this point, I'd leave the cable out and try to carefully reinsert the latch. Watch out that you don't damage the socket itself, or you'll be in for a much more complicated/expensive repair. With the latch back in place, you can slide the cable in and close it up.