メインコンテンツにスキップ

はじめに

The battery is attached to the back of the device's display. In this guide, you will desolder the battery connections to the motherboard and remove the battery from the device. This guide requires soldering; please be careful and ventilate the room.

パーツ

パーツは指定されていません。

  1. Identify the SD card port.
    • Identify the SD card port.

  2. Insert the smallest plastic opening tool into the SD card port. Gently pry until the back panel separates from the screen panel.
    • Insert the smallest plastic opening tool into the SD card port. Gently pry until the back panel separates from the screen panel.

    • Do not insert opening tool too far. Avoid making contact with the metal inside the port.

  3. Slide the opening tool along the seam between the back panel and the screen panel, prying the panels apart as you move around the edges.
    • Slide the opening tool along the seam between the back panel and the screen panel, prying the panels apart as you move around the edges.

  4. iPhoneのバッテリーキット

    Only $29.99

    Buy Now

    iPhoneのバッテリーキット

    Only $29.99

    Buy Now
  5. Separate the back panel from the rest of the device.
    • Separate the back panel from the rest of the device.

  6. Desolder the battery connectors from the motherboard.
    • Desolder the battery connectors from the motherboard.

  7. Pull the bright blue-green tabs to remove the battery from the rest of the device.
    • Pull the bright blue-green tabs to remove the battery from the rest of the device.

    • Pulling the tabs may not fully disconnect the battery from the metal display casing.

  8. If the previous step is unsuccessful, wedge the smallest plastic opening tool between the adhesive and the metal display casing. Wedging may apply unsafe pressure on the battery. Be careful not to puncture the battery.
    • If the previous step is unsuccessful, wedge the smallest plastic opening tool between the adhesive and the metal display casing.

    • Wedging may apply unsafe pressure on the battery. Be careful not to puncture the battery.

まとめ

To reassemble your device, follow these instructions in reverse order.

Bryce Harmsen

メンバー登録日: 2018年09月25日

593 ポイント

5のガイドは作成済み

チーム

Central Washington University, Team S1-G4, Pengilly Fall 2018 Central Washington University, Team S1-G4, Pengilly Fall 2018人のメンバー

CWU-PENGILLY-F18S1G4

4 メンバー

10のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 32

今までの合計 198