メインコンテンツにスキップ

これらの交換部品ガイドを使って、Samsung Galaxy Watch Active2を修理しましょう。

44回答 すべてを表示

stuck on rebooting screen not turning on

rebooting screen loop keeps appearing and then disappears without turn on

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 5
コメントを追加

4件の回答

ベストアンサー

Unscrew the 4 screws and remove the back cover. Disconnect the battery and leave for a few minutes. Reconnect the battery and try turning the watch on.

このアンサーは役に立ちましたか?

スコア 1

2 件のコメント:

Where did you get the screwdriver from? - it looks like a tiny 3-cornered star.

さんによる

コメントを追加
最も参考になった回答

seems like you have a hardware issue. its probably under warranty still so contact samsung and see what they have to say bout it. hope this can help can help!

このアンサーは役に立ちましたか?

スコア 1

6 件のコメント:

no Samsung store said it can't be fixed

and after that, I searched online and found out that many people had the same issue with no fix from Samsung or replacement

also people had this issue fixed with active one but same way not working on active 2

さんによる

I had the same issue a few days ago, but it happened at the same time that the battery stopped holding a charge. Going to replace the battery with one from Amazon and see if that resolves the issue...

さんによる

So replacing the battery did resolve the rebooting issue, but I broke the ribbon cable connecting the power button to the motherboard in the process so the watch is now inoperable.

さんによる

I'm getting the same issue after the update just came through. Started seeing error yesterday night. I'll try replacing the battery myself too.

さんによる

my watch keeps showing the logo over and over not coming on and if i press the buttons it will show the rebooting screen and then do the same thing over and over again

さんによる

1以上のコメントを表示

コメントを追加

I am having the same problem with my galaxy active 2. I was wearing it while teaching and it had a 89% charge on the battery and it just all of the sudden started into the reboot loop. I've tried resetting it and it didn't work because I have no connection with my phone. So it's best to try to replace the battery then?

このアンサーは役に立ちましたか?

スコア 0

1件のコメント:

Possibly, though there's also a way to enter recovery mode that you might try in order to reset it before disassembling the watch. The battery replacement was relatively easy and the battery kit came with instructions, the hardest part was unsticking the old battery from the frame. I dropped the internals when putting it back together which broke the power button cable, as far as I can tell there's no way to fix that. So be careful not to drop it!

さんによる

コメントを追加

Leave the watch to go completely flat leave it for a couple of weeks trechargeLeave the watch to go completely flat leave it for a couple of weeks trecharge

このアンサーは役に立ちましたか?

スコア 0

1件のコメント:

Im sorry I didnt quite understand what you said

さんによる

コメントを追加

回答を追加する

Maha Mansoor さん、ありがとうございました!
統計データ:

過去 24時間: 1

過去 7 日: 32

過去 30 日: 124

今までの合計 17,276