There is a good chance that you just tore the ribbon cable that connects from the front faceplate to the rf module/board. It also could be that it's just misaligned. The best way I've found to install the faceplate and top cover for Xbox One's is to put it on the edge of your workbench then work under it. That way you have better access to the ribbon cable and connector.
-
That's what I would check first. Its unlikely that you did any other damage to anything just replacing the disc drive.
+
That's what I would check first. It’s unlikely that you did any other damage to anything just replacing the disc drive. If that’s the case, maybe the problem is unrelated and you should try the solutions in the [https://www.ifixit.com/Wiki/Xbox_One_Won%27t_Turn_On|Xbox One Won’t Turn On] wiki just in case.
There is a good chance that you just tore the ribbon cable that connects from the front faceplate to the rf module/board. It also could be that it's just misaligned. The best way I've found to install the faceplate and top cover for Xbox One's is to put it on the edge of your workbench then work under it. That way you have better access to the ribbon cable and connector.
That's what I would check first. Its unlikely that you did any other damage to anything just replacing the disc drive.
I hope this helps.