メインコンテンツにスキップ
ヘルプ

現在のバージョン作成者: oldturkey03

テキスト:

-Brian, the starter is located between transmission and engine down intake manifold.
+Brian, the starter is located between transmission and engine down intake manifold. Look for number 17 in the diagram
[image|287607|align=center]
STARTER REMOVAL/INSTALLATION
Warning
• When the battery cables are connected, touching the vehicle body with starter terminal B will generate sparks. This can cause personal injury, fire, and damage to the electrical components. Always disconnect the battery before performing the following operation.
1. Disconnect the negative battery cable.
2. Remove the battery.
3. Remove the intake manifold bracket.
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
[image|287606|align=center]

ステータス:

open

編集者: oldturkey03

テキスト:

Brian, the starter is located between transmission and engine down intake manifold.
-[image|287607|align=left]
+[image|287607|align=center]
STARTER REMOVAL/INSTALLATION
Warning
• When the battery cables are connected, touching the vehicle body with starter terminal B will generate sparks. This can cause personal injury, fire, and damage to the electrical components. Always disconnect the battery before performing the following operation.
1. Disconnect the negative battery cable.
2. Remove the battery.
3. Remove the intake manifold bracket.
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
+
+[image|287606|align=center]

ステータス:

open

オリジナル投稿者: oldturkey03

テキスト:

Brian, the starter is located between transmission and engine down intake manifold.

[image|287607|align=left]

STARTER REMOVAL/INSTALLATION

Warning

• When the battery cables are connected, touching the vehicle body with starter terminal B will generate sparks. This can cause personal injury, fire, and damage to the electrical components. Always disconnect the battery before performing the following operation.

1. Disconnect the negative battery cable.

2. Remove the battery.

3. Remove the intake manifold bracket.

4. Remove in the order indicated in the table.

5. Install in the reverse order of removal.

ステータス:

open