学生によって寄稿されたWiki
iFixit学生教育プログラムに参加している素晴らしい学生チームが、このWikiを作成しました。
Screen Intermittently Turns Black
About every 40 minutes, the screen will flash black for about 2 seconds.
Hard Restart
Sometimes the PlayStation 3D Display simply needs a hard restart. Power down device and unplug all cables. Hold power button down for 10 seconds after power is disconnected. Plug all cables back in and power device back on.
HDMI Control
Sometimes, the HDMI Control feature can cause the screen to periodically flicker black. Pull up the main menu. Scroll down to "Settings.'' Turn "HDMI Control" off.
Faulty HDMI Cable
This problem may be due to a faulty HDMI Cable. Replace the supplied HDMI cable with a new one.
3D Glasses not working properly
Your 3D glasses are either not connecting or not properly synced with the TV.
Battery Switch on the Glasses
Check that the "Battery" switch on the glasses is in the "on" position and that the glasses are charged.
Re-sync the glasses
Turn the glasses off, wait a few seconds, then turn them back on.
Check the glasses
Check if both of the glasses are having problems. If only one of the pairs is having issues, it may need to be replaced.
Replace 3D Sync Transmitter
If both of the glasses power on but do not work properly, the 3D Sync Transmitter may need to be replaced.
Device Won't Turn On
Evident when indicator bar doesn't turn on when device is plugged in or powered on.
Loose Power Cable
Check that the power cord is securely plugged in on both ends and properly connected.
Defective Power Cable
Replace the power cable with a new one.
Defective Power Port
The power port may need to be replaced.
Unresponsive Screen
One of the most common issues with the device.
Upon power up, the indicator light will flash red twice and continue to do so until the device is turned back off. When this happens the screen will not come on and the device will remain unresponsive.
Hard Restart
Sometimes the PlayStation 3D Display simply needs a hard restart. Power down device and unplug all cables. Hold power button down for 10 seconds after power is disconnected. Plug all cables back in and power device back on.
Main Board Failure
This has been a common issue with the device. Unfortunately there is no conclusive solution. Consider contacting the store you bought the device from or Sony about this issue.
Unresponsive Buttons
Certain buttons fail to recognize an input making it difficult/impossible to adjust volume or settings.
Buttons Need To Be Cleaned
Turn the device off and gently clean on and around the buttons.
Buttons Worn Out
A replacement of the buttons may be needed,
No Sound/Poor Quality
When in use there is no sound or poor, scratchy, sound quality.
Check All Audio Connections
Check that all audio cables are properly connected.
Adjust Settings
Go into the menu and adjust the audio settings to see if this corrects the problem.
Blown Speakers
The speakers may be blown and a replacement of the side speakers may be needed.
Indicator Lights not Illuminating
At the bottom off the screen, under the PlayStation logo, there is an indicator light bar.
When device is plugged in there is no red indicator light but device still can turn on. When in use there is no blue indicator light.
Burnt-out Light Bar
In this case the indicator light bar will need to be replaced.
チーム
Cal Poly, Team 12-16, Maness Fall 2015 Cal Poly, Team 12-16, Maness Fall 2015人のメンバー
CPSU-MANESS-F15S12G16
4 メンバー
8のガイドは作成済み
14 件のコメント
Thank you for the hard restart. Bought this on release day and just had this happen for the first time. Could get volume but no picture. You seriously just save it's life as it was going attempt to fly out the window 5 stories high. But really thank you so much
Ghost - 返信
What about flickering static?
Mark Thomas - 返信
Is there any solution to the flashing red light and screen not showing a displace?
I'm having unresponsive screen problems
Carlos - 返信
Mine done same thing after a storm. I can get HDMI 1 to work as long as I'm using both 1 and 2 and both devices regardless of what device isvas long as they both on and both in ports then HDMI 1 will work and TV acts normal but you will lose signal if you unplug HDMI 2 or turn off device on HDMI 2. I hv no idea why this works or why it effects other port.
Dwayne Walden -
Worst display ever!
This thing turn black for no reason and your tips doesn't help at all
This is made for gaming but I can't game when the screen turn black randomly.
ti_prodigy14 - 返信
Still think the display is quite nice and use it as a TV in the spare bedroom (works with generic Sony remote and HDMI input from satellite box), but I too have had problems with it. Luckily, my main board failed (blinking red light) while it was still under warranty. They sent me a free shipping box and prepaid label and I got back a working unit a couple weeks later.
Now though, every couple weeks the picture won't come on, just the sound. Easy fix, like mentioned before, is to hard reset the monitor. I just unplug it for a few seconds and when plugged back in, it works again for a couple weeks, month, or so.
Dan M -
He literally tells you how to stop it. Turn of your monitors "hdmi control" and it'll stop.
Charles R Donaho -
This TV has a screen black out problem that none of your tricks could help. This panel over heats with prolonged use and the only way to fix it is to put a fan behind it.
Jarrod Younger - 返信
I just recently purchased one of these from a goodwill store for $50. I didn’t even know it was 3D enabled, and therefore, I bought it without also getting a pair of the 3D glasses with it. I was just looking for a good gaming display for use with my xbox one, even though it was clearly a playstation branded product, I assumed there should be no reason why I could not use it with my xbox. I also assumed this was by far my best bet of getting a decent gaming display at that place or anywhere else for that price. well…I simply cannot get this thing to show me any sign of life outside of the blue light coming on for about 2.5 seconds. the screen does not light up at all , nor have I been able to see anything appearing on it at all even with a flashlight shinning at it . so it can’t just be the backlight that’s burnt out, right?I took off the back panel to see if anything is clearly burnt out ,but so far everything appears to look perfectly fine. tried the hard restart but it doesn’t seem to do anything.
ryanrayner13 - 返信
I have recently purchased an HDMI splitter in hopes of using my 3D display as part of a dual monitor setup. I’ve tested this with known working HDMI cables and keep getting the error message on the screen saying “Not Supported”
I have tried adjusting the picture settings, and a hard reset, but with no luck. Does anyone have a solution, or has anyone else run into this problem?
Crystal Johnson - 返信
I've had this tv for years and suddenly tonight I tried to watch a movie and the sound went out after just a second. I went through menu>sound>reset current mode and it will play sound for maybe half a second then return to silent. Tried switching hdmi ports too and exact same result. Has anyone had this problem and fixed it?
Jesse p - 返信
Hard reset actually fixed it! I hope this helps someone. Also I've had this tv for around 8 years without any problem until this
Jesse p -
Trying to use a computer monitor.. I have a VGA to HDMI adapter. Just gives me a no signal sign in either of the ports.. tried a hard restart as well. Any suggestions??
Cory Webb - 返信
What is screen worth in U.S.currency
Joe david Villarreal - 返信