Glass screen cover came out just using my fingernails. Used a tupperware container as a prop to keep the screen at a good angle to access the cords underneath.
Confirming it's not the black/brown, but the one to its left in the photos.
Mine is black/WHITE rather than black/black, though. I believe the photo also shows it as black/white. It has a black casing over the two wires farther down, which is likely where the confusion is coming from?
Thanks for the comments! Those plastic tools are called "spludgers," the internet tells me, so I added that to the guide. I also put a note in about the panel order, since re-doing the guide would be a pretty big job, but I suspect you're right.
