Hi!

Sounds like the laser is having trouble to move. You need to open up the drive. Make sure the holder attached to the laser (which leans on the worm gear/motor) is able to move. The worm gear/motor is fine as it wants to move the laser. Don’t clean it, as it still needs to move freely (it’s sort of oiled). It also can be that the laser is broken and needs to be replaced. But you need to remove dust (if there is any). And you can move the laser with your hand to make sure it moves freely (this is causing the noise most of the time).

Hi!

You need to solder the connections again, and check if it is working afterwards.

If not, desolder all the connections, clean it and put some fresh solder on it again (but yea, you need soldering experience to do it…)

Hi Joe,

Alisha ( @flannelist ) has been working diligently on troubleshooting guides, and I'd suggest taking a look at the No Video Out guide they've written as the place to start.

Nintendo Switch No Video Out - iFixit Troubleshooting

Other than that, it appears you're not the only person with that problem. Ethan ( @nahdoesntexist ) was having the same issue, but unfortunately did not find a solution.

SOLVED: Nintendo switch is charging, but not outputting to a TV. - Nintendo Switch - iFixit

An interesting find here was that if you take the dock connector out of the dock and plug it into the Switch it works, but once it's installed in its plastic shell it no longer works. I'm not sure if that's of any help or not.

Hi Poorav,

Sorry to hear about your phone. Those kind of display issues are almost always a result of the LCD or the touchscreen failing (it's not clear from your description which problem you're having), but the fix is the same either way; you're going to have to replace the screen in order to get it working again.

I'm afraid iFixit doesn't have a guide for your phone to show you how to do that repair, but luckily there's a Spanish site called Nadie Me Llama Gallina that has exactly what you need.

Manuales / Xiaomi Mi6 / Full screen with frame

The screen itself is easy enough to get and is relatively inexpensive; I usually start with sites like Amazon, eBay and AliExpress depending on how quickly you need the part vs. how much you're willing to pay. Here's the first one that came up on my rather cursory search.

Original Mi6 LCD For Xiaomi Mi 6 Display With Frame 5.15" Mi 6 LCD Fingerprint Display Touch Screen Glass Panel Assembly - AliExpress

Note that you can buy the screen with or without the frame already attached; in general the price without the frame is marginally cheaper, but doing it with the frame is the generally recommended way, and the instructions I linked to are indeed for replacing the screen plus frame assembly. Doing the screen alone requires a different set of instructions; you can generally find those on YouTube if need be.

Good luck; let us know how your repair goes, and be sure to ask if you have any questions.

Can someone guide me on how to access the touch sensor board?

I have the same issue. I have tried the touch sensor and control boards. washer boot up and seems fine. It does have a 56 in the display. I could not find an explanation of this. All touch buttons and the dial are unresponsive. Child lock indicator is not lit. Any ideas

Only hot air

Hi,

Here’s a link to the Mazda 323 Protege Bg Repair Manual 89-94

Scroll down and click on Engine SOHC or Engine DOHC (you didn’t specify) to view the procedure to replace the head gasket. For the SOHC engine it starts on p.B1-16. I didn’t check for the DOHC engine but it would be in the index at the start of the section

@danj

Seems like this pin is a bit off center. Can i try to pull it back in place? I don’t want to break it.