Phone is not showing any sign while charging or turning on .just black screen

On My mobile display notification bar and lock screen the notification always showing "device is hd capable" so how to remove permanently

On My mobile display notification bar and lock screen the notification always showing "device is hd capable" so how to remove permanently

Hi there. I replaced the digitiser on my iPad6. However, there’s a problem that part of the screen in the middle doesn’t respond to touch. See this photo of a drawing app.

Anyone seen anything like that before. I’m wondering if the digitiser has a manufacturing issue, or if I’m not not connecting things properly.

Thoughts?

Thanks.

Hey there

I opened up my G512 LV to clean it up and change the silicons of it and add an extra ssd. After puting everything back together carefully and reassembled it the screen is not turning on … its dimmed and I can see something of windows by puting light on lcd.

Everything is fine with external display.

Every part of laptop ( battrey, ram, cpu Etc ) works fine.

But there is no luck with Built in display its just dimmed or better to say blacked out.

I also switched rams and reconnected the lcd cable to motherboard serveral times and no luck also tried hard reset and win + ctrl + shift + n.

I even tried electrisity discharge of mother board ( took off battrey and no adapter then holded power for 30sec ).

My tv won’t respond to remote control and it used to work.it isn’t the control because I have bought 4 controllers and have not worked so it can’t be the controller but the tv.it used to be like that a couple months ago but I had the toshiba remote app but just a week ago I have changed my internet and now can’t connect the tv to internet which means the app won’t work please I need an answer fast I really don’t want to waste more money please and thank you very much if you answer

In short, what do i need to re-solder the battery door latch switch?

A few days ago my canon 60d suddenly stopped working, it turned on once after i waited a while but the screen glitched out and it died and wouldn’t turn on since then. I was filming in the heat on the beach constantly in the sun. I was trying to find a fix for my dead camera and some people said i should push the tiny switch that is under the battery door so i did, i tried that a few times, no luck with switching on the camera and i was thinking i’m doing something wrong and then tried it again and it went to one side and then broke off.

Now i disassembled it and found the switch, so now i want to solder it back in the right place and i want to know what tools do i need (Heat gun, solder with a tiny tip) or some kind of paste.

P.S. If you know, please tell me the reason why my camera suddenly died. Could it have been from overheating, because i didn’t turn it off, it was in the sun and the battery was empty.

The Switch:

The spot where it was: