メインコンテンツにスキップ

Reemplazo del panel de vidrio del iMac Intel 20" EMC 2133 y 2210

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての31個のガイドに反映されます。

手順 1を翻訳中

英語
スペイン語
手順1
iMac Intel 20" EMC 2133 and 2210 Glass Panel Replacement: 手順 0、 2の画像 1 iMac Intel 20" EMC 2133 and 2210 Glass Panel Replacement: 手順 0、 2の画像 2
  • The glass panel is fixed onto the front bezel with fourteen magnets around its perimeter.

  • Stick two suction cups to opposing corners of the glass panel.

  • To attach the suction cups we sell, first position the suction cup with the movable handle parallel to the face of the glass panel. While lightly holding the suction cup against the glass, raise the movable handle until it is parallel with the other handle.

  • If your suction cups refuse to stick, try cleaning both the glass panel and the suction cup with a mild solvent such as Windex.

El panel de vidrio se fija al bisel frontal con catorce imanes alrededor de su perímetro.

Pega dos ventosas en las esquinas opuestas del panel de vidrio.

Para colocar las ventosas que vendemos, primero coloca la ventosa con el mango móvil paralelo a la cara del panel de vidrio. Mientras sostienes suavemente la ventosa contra el vidrio, levanta la manija móvil hasta que quede paralela con la otra manija.

Si tus ventosas se niegan a adherirse, intenta limpiar tanto el panel de vidrio como la ventosa con un disolvente suave como Windex.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります