メインコンテンツにスキップ

Ersatz des optischen Laufwerks durch eine Festplatte

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての24個のガイドに反映されます。

英語
ドイツ語

手順 3を翻訳中

手順3
Optical Bay Enclosure Dual Hard Drive Replacement: 手順 0、 2の画像 1 Optical Bay Enclosure Dual Hard Drive Replacement: 手順 0、 2の画像 2
  • Once the hard drive is snug, reinsert the plastic positioner while holding the hard drive against the bottom of the enclosure.

  • Reconnect any cables you have removed from the original optical drive onto the optical bay enclosure.

Sobald die Festplatte fest sitzt, kannst du den Abstandshalter aus Kunststoff wieder einsetzen. Drücke dabei die Festplatte gegen die Unterseite des Gehäuses.

Schließe alle Kabel, die du vom ursprünglichen Laufwerk entfernt hattest, am optischen Laufwerk an.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります