メインコンテンツにスキップ

Remplacement de l'écran du Google Pixel

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての6個のガイドに反映されます。

英語
フランス語

手順 6を翻訳中

手順6
Google Pixel Display Replacement: 手順 0、 3の画像 1 Google Pixel Display Replacement: 手順 0、 3の画像 2 Google Pixel Display Replacement: 手順 0、 3の画像 3
  • With the adhesive cut, slowly lift the display up from the top (the side with the speaker-grille cutout), carefully flip it over vertically toward the bottom of the device, and rest it on its face, as shown.

  • Don't forget there's sticky adhesive everywhere, so consider resting an opening pick between the screen and display, to avoid spreading the gunk!

  • Do not attempt to completely remove the display yet, as it is still connected by a fragile ribbon cable. Be careful to not to strain the cable while positioning the display.

Une fois l'adhésif tranché, soulevez lentement l'écran en commençant par le haut (du côté de l'encoche de la grille du haut-parleur). Retournez-le soigneusement vers le bas de l'appareil et posez-le à l'envers.

N'oubliez pas qu'il y a de la colle partout, alors pensez à placer un médiator entre l'écran et le téléphone, pour éviter de répandre la saleté !

N'essayez pas encore de retirer complètement l'écran qui est encore relié à une nappe fragile. Faites attention à ne pas forcer sur la nappe quand vous posez l'écran.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります