メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

英語
日本語

手順 18を翻訳中

手順18
Once all of the adhesive is loose, lift the battery up from the bottom and sway it out over the left side of the rear case. Make sure not to pull it out because it is soldered onto the logic board. Once battery is out of case turn the battery over to straighten its cable and set it down.
  • Once all of the adhesive is loose, lift the battery up from the bottom and sway it out over the left side of the rear case.

  • Make sure not to pull it out because it is soldered onto the logic board.

  • Once battery is out of case turn the battery over to straighten its cable and set it down.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります