メインコンテンツにスキップ

Reemplazo de la placa lógica del iPad Air LTE

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
スペイン語

手順 18を翻訳中

手順18
iPad Air LTE Logic Board Replacement: 手順 0、 2の画像 1 iPad Air LTE Logic Board Replacement: 手順 0、 2の画像 2
  • A bend in the speaker cable makes it difficult to peel the tape up from the end.

  • Instead, grip the tape just under the speaker and peel it down, away from the edge of the case.

  • Be careful with your tweezers—only grab and peel the tape, and not the cable beneath.

Un pliegue en el cable del altavoz dificulta el despegado de la cinta desde el extremo.

En su lugar, agarre la cinta justo por debajo del altavoz y despéguela hacia abajo, alejándola del borde de la carcasa.

Ten cuidado con las pinzas: coge y despega sólo la cinta, no el cable que hay debajo.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります