メインコンテンツにスキップ

Sostituzione scheda logica iPad Air LTE

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
イタリア語

手順 26を翻訳中

手順26
iPad Air LTE Logic Board Replacement: 手順 0、 3の画像 1 iPad Air LTE Logic Board Replacement: 手順 0、 3の画像 2 iPad Air LTE Logic Board Replacement: 手順 0、 3の画像 3
  • Slide the flat end of a spudger under the Lightning connector cable to break up the adhesive securing it to the rear case.

  • If necessary, push the left speaker cable gently aside to provide access to the Lightning connector cable.

Fai scorrere la parte piatta di uno spudger sotto il cavo del connettore Lightning per separare l'adesivo che lo fissa al case posteriore.

Se necessario, spingi il cavo dell'altoparlante sinistro di lato per aver accesso al cavo del connettore Lightning.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります