メインコンテンツにスキップ

Reemplazo de la placa lógica del iPad Air LTE

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
スペイン語

手順 20を翻訳中

手順20
iPad Air LTE Logic Board Replacement: 手順 0、 2の画像 1 iPad Air LTE Logic Board Replacement: 手順 0、 2の画像 2
  • Continue peeling up the tape away until there is enough slack in the left speaker cable to disconnect it.

  • Do not completely remove the tape—it will be easier to replace if you leave a section still attached to the rear case.

Continúa despegando la cinta adhesiva hasta que haya suficiente holgura en el cable del altavoz izquierdo para desconectarlo.

No retires completamente la cinta; será más fácil sustituirla si dejas una sección todavía adherida a la carcasa trasera.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります