メインコンテンツにスキップ

Reemplazo de la placa lógica del iPad Air LTE

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
スペイン語

手順 4を翻訳中

手順4
iPad Air LTE Logic Board Replacement: 手順 0、 3の画像 1 iPad Air LTE Logic Board Replacement: 手順 0、 3の画像 2 iPad Air LTE Logic Board Replacement: 手順 0、 3の画像 3
  • Use the pointed tip of a spudger to disconnect the microphone cable connector from its socket on the logic board.

  • Use the pointed tip of the spudger to disconnect the GPS antenna cable, directly to the right of the microphone cable connector.

Utiliza la punta de un spudger para desconectar el conector del cable del micrófono de su zócalo en la placa lógica.

Utiliza la punta del spudger para desconectar el cable de la antena GPS, directamente a la derecha del conector del cable del micrófono.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります