メインコンテンツにスキップ

iMac Intel 21.5インチ EMC 2389 光学ドライブの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 4を翻訳中

手順4
iMac Intel 21.5" EMC 2389 Optical Drive Replacement: 手順 0、 1の画像 1
  • Disconnect the optical drive cable by pulling its connector away from the optical drive.

  • Remove the optical drive from the iMac.

  • Do not forget to also move the thermal sensor from the optical drive to the enclosure when you install the second hard drive.

光学ドライブからコネクタを引っ張り、光学ドライブケーブルの接続を外します。

iMacから光学ドライブを取り出します。

2番目のハードドライブをインストールする際は、光学ドライブからサーマルセンサもエンクロージャーに移すのを忘れないでください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります